* feat(cluster): cluster_root_for_graph_uri detection helper (RFC-010 Slice 3)
Public helper the CLI uses to refuse `init` into a cluster-managed location:
given a graph storage URI of the cluster layout (`<root>/graphs/<id>.omni`),
return the cluster root if `<root>` holds `__cluster/state.json`, else None.
Cheap by construction — a URI that doesn't match the `<root>/graphs/<id>.omni`
shape returns None with zero I/O, so ordinary `init` targets never probe
storage. Works for file:// and s3:// via the storage adapter. Adds two
ClusterStore accessors (`display_root`, `has_state`).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(cli): cluster-managed maintenance addressing + init signpost (RFC-010 Slice 3)
Two cluster-graph-aware CLI behaviors, sharing the cluster-resolution path.
Maintenance addressing. `optimize`/`repair`/`cleanup` gain
`--cluster <dir|s3://…> --cluster-graph <id>`, which resolves the graph's
storage URI from the served cluster snapshot (the same truth a `--cluster`
server boots from — `read_serving_snapshot*`) and opens it embedded. The
operator no longer hand-types `<storage>/graphs/<id>.omni`. A distinct flag is
required because the global `--graph` is `requires = server` and means a remote
multi-graph id. clap enforces both-or-neither and exclusion with the positional
URI / `--target`; an unserved graph errors loudly, pointing at `cluster apply`.
init signpost. `init` refuses a cluster-managed positional path (the
`<root>/graphs/<id>.omni` layout where `<root>` holds `__cluster/state.json`,
detected by `cluster_root_for_graph_uri`) and points at `cluster apply` — graphs
in an established cluster are created with ledger/recovery/approvals, not by
hand. The check is gated on the path shape, so ordinary `init` does no extra I/O
and existing pre-apply cluster-graph inits are unaffected.
planes guard remediation now also mentions `--cluster … --cluster-graph …`
(the two Slice-1 guard-string tests track it). Docs updated (cli-reference
Command planes, maintenance.md, cluster.md §7); the stale "no S3-hosted cluster
directories" limitation is dropped (RFC-006 landed it).
Tests (cli_cluster.rs, reusing the apply-a-cluster fixture): resolve by id,
unknown-id error, `--cluster` requires `--cluster-graph`, init refusal +
signpost, and ordinary init still works.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(cli): resolve cluster graphs from the state ledger, not the serving snapshot
Addresses the Greptile review on #221. `read_serving_snapshot*` does
all-or-nothing serving validation — recovery-sidecar checks plus a digest
verify of every catalog payload (query .gq, policy blobs). Using it to resolve
a maintenance target coupled `optimize`/`repair`/`cleanup` to the readiness of
unrelated resources: a single corrupt policy blob, or a pending recovery sweep,
would block the command before it could touch the graph — worst for `repair`,
the tool you reach for *when the cluster is degraded*.
Add `omnigraph_cluster::resolve_graph_storage_uri(cluster, graph_id)`: read the
state ledger, confirm the graph is in the applied revision, return
`graph_root(id)` — the URI is deterministically derivable, no catalog
validation. The CLI's cluster resolver now calls it.
Test: `optimize --cluster … --cluster-graph …` still resolves after the catalog
payloads (`__cluster/resources/`) are removed — the ledger-only path is not
blocked by degraded/unrelated catalog state.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
Addresses the Greptile review on #217:
P1 — `lint` reported two different names. `command_label` returns `lint`, but
`execute_query_lint` passed `"query lint"` as the resolver operation string, so
`lint --server` said `lint` while `lint <https>` said `query lint`. Both were
pinned by tests. `query lint` is the *deprecated* alias (argv-rewritten to
`lint`), so the canonical name is `lint`: switch both user-facing strings in
`execute_query_lint` (the storage-plane bail label and the
requires-schema-or-target usage message) to `lint`, and update the two pinned
assertions in `cli_data.rs`.
P2 — user-doc debt (AGENTS.md rule 1: error text is observable behavior).
Document the plane model in `cli-reference.md` (new *Command planes* section:
data vs storage/maintenance vs control, which addressing flags apply, and the
declared wrong-plane / remote-target errors), and add an addressing note to
`maintenance.md` cross-referencing it.
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* feat(cli): declared plane capability surface + wrong-plane guard (RFC-010 Slice 1)
New `planes.rs` is the single source of truth for which plane each subcommand
belongs to (Data / Storage / Control / Session). `command_plane` is an
exhaustive match — adding a `Command` variant is a compile error until its
plane is declared, so the surface cannot silently drift from the command set.
It descends into the nested enums where the plane differs per subcommand
(`schema plan` is storage while `schema show/apply` are data; `queries
validate` opens the graph while `queries list` reads only config).
`guard_addressing` runs once in `main` before dispatch: the data-plane
addressing flags `--server`/`--graph` on any non-data verb now fail with one
declared, pinned error instead of being silently ignored (`optimize --server
prod` previously dropped `--server`). `init`'s message drops the `--target`
half since it takes only a positional URI today.
Test: `cli_schema_config::schema_plan_with_server_flag_errors_wrong_plane`
pins the per-subcommand label, proving the guard descends into the nested enum.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* feat(cli): storage-plane verbs fail loudly on a remote target (RFC-010 Slice 1)
`optimize`/`repair`/`cleanup` switch from `resolve_uri` to `resolve_local_uri`,
so a `--target` (or positional URI) that resolves to a remote server now fails
with a declared storage-plane message instead of whatever `Omnigraph::open`
said about an `http(s)://` URI. The `resolve_local_graph` bail is reworded to
that storage-plane message, so every storage verb already on the local resolver
(`schema plan`, `queries validate`, `lint`) speaks with one voice.
Net: `optimize --target knowledge` resolves to the graph's storage URI and runs
embedded; `optimize --target prod` (remote) fails loudly; `optimize --server`
is caught earlier by the guard. Positional-URI invocations are unchanged.
Tests (pinned strings, per RFC-010's test plan): optimize happy path on a local
graph, `optimize --server` wrong-plane error, `optimize <https>` storage-plane
error; the existing `query_lint_rejects_http_targets_without_schema` assertion
is updated to the new shared message.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
~/.omnigraph/config.yaml joins the resolution chains as the operator
surface: operator.actor becomes the last hop of THE actor chain (--as >
legacy cli.actor during the RFC-008 window > operator.actor > none, one
implementation for direct-engine and cluster commands alike) and
defaults.output joins the read-format cascade below every more-specific
source. Discovery honors $OMNIGRAPH_HOME (tilde-expanded, #139 finding 9);
an absent file is an empty layer; unknown keys WARN and load (a file
written for later slices must not break this CLI); malformed YAML is a
loud error. The module is CLI-only — the server never reads operator
config (invariant 11 by construction).
$OMNIGRAPH_CONFIG becomes a first-class stand-in for --config in
load_config (flag > env > ./omnigraph.yaml), one meaning in both binaries.
The test harness pins hermeticity: spawned binaries get a nonexistent
OMNIGRAPH_HOME by default so no test ever reads the developer's real
operator config. New coverage: loader unit tests, the env-precedence
matrix on load_config_in, and spawned-binary e2es for the actor chain
(operator wins with no flag/legacy key; legacy outranks it; --as wins) and
the format cascade.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
