From b9c3a8a1632342f3d1d891afae3aefdb68f398c0 Mon Sep 17 00:00:00 2001
From: Mike Croucher <Michael.P.Croucher@googlemail.com>
Date: Thu, 7 Jul 2016 08:45:27 +0100
Subject: [PATCH] First attempt to use appveyor for windows builds

---
 appveyor.yml | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 appveyor.yml

diff --git a/appveyor.yml b/appveyor.yml
new file mode 100644
index 00000000..cf64d4e3
--- /dev/null
+++ b/appveyor.yml
@@ -0,0 +1,46 @@
+environment:
+
+  matrix:
+
+    # For Python versions available on Appveyor, see
+    # http://www.appveyor.com/docs/installed-software#python
+    # The list here is complete (excluding Python 2.6, which
+    # isn't covered by this document) at the time of writing.
+
+    - PYTHON: "C:\\Python27-x64"
+    - PYTHON: "C:\\Python35-x64"
+
+install:
+  # We need wheel installed to build wheels
+  - "%PYTHON%\\python.exe -m pip install wheel"
+  - "%PYTHON%\\python.exe -m pip install scipy"
+  - "%PYTHON%\\python.exe -m pip install paramz"
+  - "%PYTHON%\\python.exe -m pip install matplotlib"
+
+build: off
+
+test_script:
+  # Put your test command here.
+  # If you don't need to build C extensions on 64-bit Python 3.3 or 3.4,
+  # you can remove "build.cmd" from the front of the command, as it's
+  # only needed to support those cases.
+  # Note that you must use the environment variable %PYTHON% to refer to
+  # the interpreter you're using - Appveyor does not do anything special
+  # to put the Python evrsion you want to use on PATH.
+  #- "build.cmd %PYTHON%\\python.exe setup.py test"
+
+after_test:
+  # This step builds your wheels.
+  # Again, you only need build.cmd if you're building C extensions for
+  # 64-bit Python 3.3/3.4. And you need to use %PYTHON% to get the correct
+  # interpreter
+  - "build.cmd %PYTHON%\\python.exe setup.py bdist_wheel"
+
+artifacts:
+  # bdist_wheel puts your built wheel in the dist directory
+  - path: dist\*
+
+#on_success:
+#  You can use this step to upload your artifacts to a public website.
+#  See Appveyor's documentation for more details. Or you can simply
+#  access your wheels from the Appveyor "artifacts" tab for your build.